V‑ZUG know-how: FAQ

The AdoraWash and AdorinaWash product ranges are ideal for family homes or flats, while the Unimatic range is designed for communal laundry rooms and small businesses.

Yes, there is. The wool programme has been specially designed to treat woollen fabrics extremely gently during the wash cycle and with a much lower spin speed. This produces fantastic results while putting the wool under as little strain as possible.

You can use the delayed start function to set your electricity provider’s low rate times up to 24 hours in advance and use the machine during these times. The current range of AdoraWash washing machines also features the intelligent OptiTime delayed start function. If you use OptiTime at night, for example, and combine it with low electricity rates, you can make energy savings of up to 63% per wash cycle.

No, the air flow cannot be changed. However, as the air circulation has only a limited impact on the drying, factors such as the size of the room, volume of laundry or how the laundry was hung up are more decisive.

spinning capacity of the selected washing programme, textile types, laundry volume in the room, room temperature and humidity, placement of the laundry in the room and how it is arranged, hanging habits (“double” over a line, “single” over a line with pegs, “single” over two lines)

The Adora SLQ and Adora SL models automatically select the appropriate wash programme for different types of laundry such as jeans, baby clothes or net curtains. The baby garments programme, for example, ensures that your little one's clothes turn out perfectly hygienically clean. Microbiological tests by the Veritas laboratory have confirmed its effectiveness.

By continuously monitoring water turbidity, the ZUG Adora can detect when your laundry has been sufficiently rinsed. This has two advantages: your clothes are perfectly rinsed and water consumption is reduced by 30%.

Your convenience is important to us. Thanks to the articulated design, you can position the operating panel according to your personal preference.

There are two options. In the event of minor soiling, the unique, automatic cleaning programme can be started via the OptiDos settings. It rinses both OptiDos dispensers with water. The second option can be applied when switching from softener to detergent or in the event of strong soiling (e.g. deposited detergent). In doing so, the OptiDos drawer can be easily removed manually without using tools and cleaned by rinsing under the tap. Do not clean the drawer in the dishwasher.

The lifecycle corresponds to the appliance lifecycle. Therefore 4,000 batches / 15 years.

Not quite. The Down thick, Down thin, Bed linen, Outdoor programmes used very rarely by users have not been adopted. Making a clearer distinction between the V2000 and the V4000.

The nominal load is 1–7 kg for the drying process in the machine. If room air laundry drying is applied, a maximum room size of 25 m² is recommended. The room air laundry dryer has a drying capacity of 1.34 kg/h, which corresponds to about 5 hours for a full laundry load of 7 kg.

Mould is caused by excess humidity in the room. Whenever laundry is hung up, the room air laundry drying function should be started to remove the humidity from the room. Alternatively, the moisture control programme can also be selected.

The two cooling zones are vertically adjustable and can be set to two different precise temperatures suitable for white and red wine, respectively. Available temperatures range from 5 to 18°C.

As with many other electronic appliances, it can help to unplug the appliance and disconnect it from the power for 10 seconds. This reboots the system so that minor faults can be fixed.

All woollens labelled as washable can be dried in the tumble dryer. The appliance uses a gentle drying process with adapted drum action and a low temperature (approximately 45°C).

40 m of rope per 10 kg of laundry are required.

Yes. Thanks to the intuitive, simple programme selection, it is possible to choose whether or not OptiDos should be used for the wash after every programme selection. When selecting “without OptiDos”, the detergent is taken from the right detergent dispenser drawer as usual.

Hoods with the automatic run-on function extract the remaining cooking vapours from the room for a specific time period (between 5 and 20 minutes) even after you have finished cooking and switched off the range hood. After that point, the range hood is switched off automatically. If the appliance is being used in recirculation mode, the activated charcoal filter can also carry out final drying of the furniture base – just like in range hoods that remove vapours by extracting them downwards (downdraft systems). This useful function is integrated into various range hoods and downdraft systems, and is activated by tapping the clock button shown at the end of the cooking process.

The exhaust duct should be as short as possible and have as few bends and curves as possible. Ideally, it should have a diameter of 150 mm. Each additional metre added to the exhaust duct and each additional bend will create resistance, reducing the power of the range hood. A more powerful range hood cannot compensate for a poorly designed exhaust duct. This will only result in increased losses and noise levels. Reducing the diameter of the exhaust duct should be avoided where possible – due to the increased flow rate, this will also lead to increased noise levels.

The following liquid detergents may be added to each dispenser: Universal detergent, colour detergent, fine detergent, softener, wool detergent, baby detergent, detergent for black clothes, detergent for white clothes, outdoor detergent. The dispensers can be flexibly filled according to personal requirements. Both dispensers with detergent, both dispensers with softener, one dispenser of detergent and one dispenser of softener, only one dispenser used with detergent or softener. The dispensers are also easily emptied if necessary and filled with another agent.

Yes. Hand wash, WetClean and wool programmes are available, and it’s also possible to activate additional functions such as Easy care.

Yes, the moisture control programme runs for 7 days and automatically starts drying the room air if the appliance detects an increase in humidity. However, the DualDry is not designed for permanent operation or the dehumidification of very humid rooms.

An optimal drying result is reached at a room temperature of 10-30°C. In rooms with very low temperatures, the function may be restricted. The DualDry may not be used under 8°C.

The V-ZUG Special Care Drum has 14,000 holes to protect delicate fabrics and prevent wear and tear from friction during the washing process.

Cooking vapours can be extracted without any problems in the case of pots up to 20 cm tall. For pots that are over 21 cm tall, we recommend placing the pot lid at an angle in order to direct the steam towards the range hood.

Compared with the extracted air solution, there is much less to consider for range hoods with recirculation air, particularly if you have chimney-based heating (such as gas, oil or coal-fired heaters, flow heaters, water heaters and open fireplaces). They are easy to install and they can be operated without restrictions if the range hood is used in recirculation mode with an activated charcoal filter. To use recirculation mode, you must provide an activated charcoal filter – the filter absorbs unpleasant odours and ensures there is fresh air in the kitchen while you are cooking.

In principle, all variants (exhaust air and/or recirculated air) are permissible for range hoods in Minergie residential buildings. Detailed information on this topic can be found at: https://www.minergie.ch.

To fully enjoy OptiLink, both the hob and the hood must be equipped with the OptiLink function. Look out for the "Fan wheel with chain links" symbol in the "Equipment and operating modes" section.

Connecting, or pairing, your V-ZUG built-in range hood with our networkable hobs is a breeze.

We recommend conveying the extracted air outside wherever possible, as this carries smells away from the kitchen. The most effective solution is to use an exhaust system (duct) with a diameter of 150 mm.

You should always ensure there is a supply of replacement air when the range hood is running. In the case of a recirculation air range hood, this enables air that is still moist after passing through the filters to be replaced. In extracted air solutions, an open window helps to optimise the air flow and prevents negative pressure building up in the kitchen.

The screen must always be pulled out to ensure the range hood can work at its best.

All metal grease filters should be cleaned at least once every two months (more frequently in the event of intensive use, and at the latest when the noise increases). Range hoods with saturation indicators on the display remind you to clean them regularly. You can soak the metal grease filter by hand and clean it with gentle detergent. It can, of course, also be cleaned in the dishwasher – simply choose an intensive programme. If you choose to wash the filter in the dishwasher, do not place any other crockery in the dishwasher.

The activated charcoal filters can be easily removed and regenerated, depending on the model. The most efficient long-life plus activated charcoal filter, for example, can be regenerated in the oven every three to six months. The long-life activated charcoal filter can be cleaned in the dishwasher and then dried in the oven. Conventional activated charcoal filters need to be replaced every six months or so.

To remove unpleasant odours, you can take the following steps. Remove the filter and clean it thoroughly. Select a more powerful programme, such as the Intensive programme. Refill the regenerating salt. Run the Pre-rinsing programme from time to time. Buy a commercially available dishwasher cleaner and add this using the Intensive programme.

Yes, our ingenious automatic wash programme continuously measures how dirty the dishes are and adapts the washing process accordingly. This ensures the appliance only uses the amount of time and resources required to get the dishes perfectly clean.

In the standard programme, our heat pump device uses a record low of 0.55 kWh of energy. 20 years ago, this figure would have been four times as great, with dishwashers using 2 kWh of energy.

With integrated dishwashers, the operating panel is visible. This is particularly useful for ChromeClass/AluClass models, as they also function as design elements. In contrast, design-integrated models feature a mirrored operating panel that fits perfectly with the FutureLine design. A wood panel the colour of your kitchen is fixed below the operating panel. With fully integrated dishwashers, the operating panel is concealed. Only when you open the appliance, you'll find it integrated in the door's upper edge.

If you're in a hurry, for example during a party, the Adora SL's sprint programme will clean your dishes in just 19 minutes. And when we say clean, we mean spick and span.

An extra-high model offers space for plates with a diameter of 33cm. This means that an extra-high dishwasher makes sense if you want to use it for large plates, tall wine glasses or baking trays.

The water hardness controller ensures that the water always has the ideal hardness. This makes the detergent more effective and ensures that the dishes and glasses are treated gently.

The hygiene programme is designed for particularly sensitive items such as cutting boards and baby bottles.

Because the cutlery drawer is located at the top of the dishwasher, loading cutlery is ergonomic and puts less strain on your back. The cutlery drawer is designed so that the cutlery does not come into contact with each other, enabling optimal cleaning and protecting your expensive cutlery. Espresso cups can be placed in the central part of the cutlery drawer. Thanks to the cutlery drawer, the cutlery basket in the lower basket is no longer required, leaving more space for plates and other items.

The Sprint programme lasts 20 minutes and is suitable for quickly cleaning lightly soiled pre-dinner glasses. The Party programme lasts 11 minutes and is perfect for when an exceptionally large number of dishes need to be washed quickly ready to be used again – for example, a party with many guests. When using the party programme, the dishwasher starts with a 20-minute heating phase, after which the dishwasher can be fully loaded up to five times in a row.

- You need to increase the amount of rinse aid in the user settings (ex-works level 4). This will increase the level of rinse agent used in the rinsing process, thereby improving the dryness. - Select the DryPlus user setting on the dishwasher. DryPlus increases the temperature during final rinsing and extends the programme duration.

Extremely fast programmes are offered at each convenience level. These programmes last between 11 and 30 minutes depending on the convenience level.

The dishwasher uses sophisticated technology to measure the amount of water which is drained from the dishwasher before flowing back into the water cycle via the drum floor. If little water flows back, the dishwasher recognises that it has a full load. The opposite happens when the dishwasher only has a light load. In this case, a large amount of water flows back into the system and the amount of water is adjusted automatically. This enables the dishwasher to save up to 1.5 litres of water for each main programme selected.

Theoretically yes. Please discuss this option with your specialist dealer.