Find usFind us

Type plate finder

All V‑ZUG appliances come with a type plate. The serial number printed on the appliance type plate helps customer service identify your appliance. In addition, the data on the type plate also provides information on the design variant, the electrical connection conditions and tests passed.

Serial number – the key to your appliance

All information concerning the appliance, such as delivery, installation, commissioning (warranty card), demonstration, service contract or troubleshooting, is continuously recorded and can be retrieved at any time via the serial number. For this reason, we always ask for the serial number so that we can provide information or support in the event of an issue relating to an appliance.

The serial number is printed on the appliance type plate and consists of three parts:

  • «SN» (formerly FN) as an identifying feature

  • a model number with 3 to 5 digits (e.g. 864)

  • a serial number (e.g. 000621)

    Important: The serial number should also be noted down in the instruction manual so that you always have the number at hand, even years after purchase.

Case 2

For appliances with a system drawer: Pull the drawer out slightly. The type plate is located on the left between the housing and the drawer.

Open the appliance door. The type plate is located on the left on the side wall.

Case 2

Pull out the flat pull-out deflector plate and release the metal grease filter. The type plate is located behind the metal grease filter on the inside of the appliance.

Case 1

For Adora: Open the drain tray. The type plate is located to the right of the foreign body trap.