V‑ZUG know-how: FAQ

The appliance automatically detects when descaling is necessary. If the refresh or hygiene programmes are used every 2 days, the following descaling intervals will be necessary: Descaling interval depending on water hardness: ▪ Hard: approx. every 3 months ▪ Medium: approx. every 4 months ▪ Soft: approx. every 7 months

If you are not going to use the appliance for an extended period of time, empty the water tank and open the appliance door.

Applying steam makes the textile fibres smooth, causing creases to unfold. Clothing is smoothed out using a combination of its own weight and a gentle stream of air.

The additional hygiene programme eliminates germs using an elevated temperature (above 60 °C) over a longer exposure time. Independent laboratory trials have confirmed a reduction in germs of up to 99.99 %.

Yes, in principle, body odour can also be removed from fabrics. It should be kept in mind, however, that body odour is produced to help remove bacteria. Since sweat is unique to each individual, the treatment result may differ from person to person. We recommend washing sweaty clothes.

Yes, wet clothes can easily be dried again in next to no time using the additional drying programme.

Virtually all of them – but we advise against using the RefreshButler on water-sensitive fabrics such as fur or leather.

The integrated heat pump and the ventilation system blow warm air into the interior and whisk away the humid air.

There are two options. In the event of minor soiling, the unique, automatic cleaning programme can be started via the OptiDos settings. It rinses both OptiDos dispensers with water. The second option can be applied when switching from softener to detergent or in the event of strong soiling (e.g. deposited detergent). In doing so, the OptiDos drawer can be easily removed manually without using tools and cleaned by rinsing under the tap. Do not clean the drawer in the dishwasher.

V-ZUG offers the appliance hygiene function in AdoraWash Vx000 washing machines. It appears at regular intervals on the appliance. The programme cleans the drum interior (while it is empty) at the maximum temperature, eliminating any bacteria that might lead to unpleasant odours.

The programme start can be individually defined via the delayed start. Furthermore, the controls can be automated via the moisture control programme.

During room air laundry drying, the room air (and therefore the clothes) is dehumidified; to this end, a heat pump is used. The temperature of the air blown out is only slightly above the temperature of the room air. DualDry releases a heat capacity of some 350-400 W into the room during operation. This means that the air blown out in normal operation is 5 - 10°C higher than the room temperature, but it is not electronically heated, which results in very good energy efficiency values. If the DualDry blows out tangibly hot air, this is often caused by a clogged fluff filter. Only when drying in the drum is the laundry dried with heated air.

Although the DualDry has time-controlled programmes, they do not need to be used to switch off the appliance automatically. An integrated humidity sensor measures the level of dryness reached and automatically deactivates the DualDry if the desired degree has been reached.

The appliance reports a fault. A9: Cleaning sieves and mats.

Very careful drying as drying is without heat and friction, walls kept dry and therefore no formation of mould, quick drying, no hanging in stuffy cellar rooms for days on end, possible to dry anything that can be stored in the room (e.g. tents, carpets, sleeping bags, covers).

With a heat pump tumble dryer, the drying takes place in a closed drum. The laundry is added to the drum and dried with the temperature of 55°C released by the integrated cooling circuit. With DualDry, the laundry is hung up on a washing line in the room. The DualDry blows dry air into the laundry items. They release the humidity into the room air. The humid room air is channelled via the evaporator installed in the DualDry. In doing so, the vapour in the air condensates on the cold evaporator surface. The dried and cooled air is then warmed up via the condenser and blown into the hanging laundry. DualDry uses the same heat pump to dehumidify the room air. However, the drying takes place at far lower temperatures.

By continuously monitoring water turbidity, the ZUG Adora can detect when your laundry has been sufficiently rinsed. This has two advantages: your clothes are perfectly rinsed and water consumption is reduced by 30%.

Your convenience is important to us. Thanks to the articulated design, you can position the operating panel according to your personal preference.

V-ZUG helps you to do this automatically thanks to the partial load water and energy economy function and EcoManagement. The latter shows you in advance whether your choice of programme is going to use large or small amounts of energy and water.  The OptiTime delayed start option also helps you to save lots of energy if you have a bit of spare time.

The lamps go out automatically after 2 minutes, which means that the washing machine can be left open after washing. The Start/Pause/Light button can be used to switch off the light manually. The automatic lighting can also be deactivated in the user settings.

Yes, the drum lighting can be replaced.

All woollens labelled as washable can be dried in the tumble dryer. The appliance uses a gentle drying process with adapted drum action and a low temperature (approximately 45°C).

Mould is caused by excess humidity in the room. Whenever laundry is hung up, the room air laundry drying function should be started to remove the humidity from the room. Alternatively, the moisture control programme can also be selected.

Apart from the usual cleaning processes, no further maintenance is required.

Blocked fluff filters and filter pads weaken the airflow. This means the laundry takes more time and energy to dry. This is why the fluff filters and filter pads should be cleaned regularly as stated in the operating manual.

Ideally so that the dry air flow of the DualDry flows directly on the laundry. However, the laundry also dries if the positioning is less ideal. The customer is free to install the hangar as they like. In an apartment building, the washing line is usually at a height of 180 - 190 cm. The washing line should not be lower than the air release flap.

A normal 230 volt socket (T13 / 10 A secured).

V-ZUG dryers are designed for minimum energy consumption. A humidity sensor continuously measures your laundry's degree of dryness. If in spite of this, your laundry turns out too dry or not dry enough, you can adjust the degree of dryness according to your needs.

Yes, a discharge pump is installed. The maximum feed height of the discharge height is 1.2 m.

The maximum feed height of the discharge height is 1.2 m.

The moisture control programme automatically starts the room air laundry drying over 7 days if the appliance detects an increase in humidity. The target humidity in the room can be set between 50% and 60%.

Yes, the moisture control programme runs for 7 days and automatically starts drying the room air if the appliance detects an increase in humidity. However, the DualDry is not designed for permanent operation or the dehumidification of very humid rooms.

An optimal drying result is reached at a room temperature of 10-30°C. In rooms with very low temperatures, the function may be restricted. The DualDry may not be used under 8°C.

No, the drying time is not changed by the use of different detergents.

The use of softeners can result in a slightly longer drying process, but there are no studies that confirm this assumption.

The CombairSteamer fits best in an existing niche (762 mm) for a standard oven or cooker. These appliances combine a complete oven and steaming functions. CombairSteamers offer all the steaming programmes of a steam cooker and the classic functions of an oven – such as hot air, top/bottom heat and grill. If expanding the niche is possible, we recommend the classic combination of a 45 oven and a 45 CombiSteamer, allowing you to benefit from the flexibility of having two cooking chambers.

The water tank holds one litre of water, which is sufficient for different steaming periods and is dependent on the temperature and the nature of the food. With Vacuisine, it is possible to reach over 48 hours of cooking time without having to refill the water tank. The water tanks in the Excellence Line can be cleaned in a dishwasher.

A heating element behind the hot air diffuser plate heats up the air inside the cooking chamber, which is circulated evenly. Steam is then introduced into the cooking chamber. The use of steam can improve heat transfer to the food. Incidentally, steam over 100 °C is not visible. The programme is particularly suitable for gratins, casseroles, meat, frozen products, chestnuts, puff and yeast pastry, bread and convenience products on 1 or 2 levels.

The external steam generator and the climate sensor ensure that only the required amount of steam can enter the cooking chamber. The steam that condenses on the food accumulates on the base of the cooking chamber as residual water. This residual water depends on the amount of food in the chamber, its temperature and the cooking time. During the cooking process, bottom heating evaporates the residual water. For a normal quantity of vegetables, the residual water on the bottom can usually be removed by wiping with a cloth. Where larger quantities of food, or frozen food, are concerned, the stainless steel tray under the perforated cooking tray helps to collect residual water.

The new Excellence Line steamers and combi-steam cookers can be cleaned with little effort thanks to the stainless-steel cooking chamber. Guided programmes remove the dirt automatically. For tough soiling, we have developed a special cleaning solution – the SteamerCleaner.

The optional fully extending runner allows you to remove up to three baking trays safely and conveniently from the baking chamber. This is particularly practical when basting a piece of meat or for removing biscuits or a flan from the baking tray.

The advantages are clear – efficient, powerful, finely regulated and fast steam build-up, quick climate change, needs-based consumption of water and energy, water is pumped back into the water tank after the cooking process, and no stagnant water remains in the pipes.

We have chosen to dispense with fully extending runners to maintain our high standards with regard to perfect cooking results. These alter the microwave field significantly and result in localised changes to the heating of the food.

According to the standard, combined appliances with microwave ovens are not allowed to have energy labels. We have been reprimanded by the European Standards Committee regarding the MSLQ. That is why we have removed the energy-label from both the PowerSteam and the MSLQ. (We would have otherwise achieved the good rating of A+)

An extra-high model offers space for plates with a diameter of 33cm. This means that an extra-high dishwasher makes sense if you want to use it for large plates, tall wine glasses or baking trays.

The water hardness controller ensures that the water always has the ideal hardness. This makes the detergent more effective and ensures that the dishes and glasses are treated gently.

The hygiene programme is designed for particularly sensitive items such as cutting boards and baby bottles.

Because the cutlery drawer is located at the top of the dishwasher, loading cutlery is ergonomic and puts less strain on your back. The cutlery drawer is designed so that the cutlery does not come into contact with each other, enabling optimal cleaning and protecting your expensive cutlery. Espresso cups can be placed in the central part of the cutlery drawer. Thanks to the cutlery drawer, the cutlery basket in the lower basket is no longer required, leaving more space for plates and other items.

The Sprint programme lasts 20 minutes and is suitable for quickly cleaning lightly soiled pre-dinner glasses. The Party programme lasts 11 minutes and is perfect for when an exceptionally large number of dishes need to be washed quickly ready to be used again – for example, a party with many guests. When using the party programme, the dishwasher starts with a 20-minute heating phase, after which the dishwasher can be fully loaded up to five times in a row.

- You need to increase the amount of rinse aid in the user settings (ex-works level 4). This will increase the level of rinse agent used in the rinsing process, thereby improving the dryness. - Select the DryPlus user setting on the dishwasher. DryPlus increases the temperature during final rinsing and extends the programme duration.