V‑ZUG know-how: FAQ

The two cooling zones are vertically adjustable and can be set to two different precise temperatures suitable for white and red wine, respectively. Available temperatures range from 5°C to 18°C.

NoFrost technology means you'll never have to manually defrost your fridge again. All of our FoodCenter models are fitted with NoFrost technology, which means they defrost automatically at regular intervals.

The Adora night economy program reduces energy consumption by 40% and water consumption by 20%. You can make use of lower night electricity rates and protect the environment. What's more, the Adora is very quiet.

This adapts the wash program to the degree of soiling. This additional function is typical for V-ZUG appliances and helps you save water, time and energy.

You select a main program by pressing a single button. This means all the required settings are chosen automatically. If desired, you can select additional programs or functions by pressing the corresponding buttons. If no button is pressed within 20 seconds, the program selected will start automatically.

To meet our customer's requirements, our new laundry room appliances now feature a 20°C wash program that can be selected by pressing a dedicated button.

The lifecycle corresponds to the appliance lifecycle. Therefore 4000 batches / 15 years.

Not quite. The Down thick, Down thin, Bed linen and Outdoor programs used very rarely by users have not been adopted. This makes a clearer distinction between the V2000 and the V4000.

If the laundry room or drying room are also to be connected to the comfort ventilation system, the two systems (comfort ventilation and DualDry) will complement each other when drying wet laundry. This means that increased air humidity in the room is reduced (dehumidified) both by the comfort ventilation system and by our dryer. There may be a problem if the target room humidity of the comfort ventilation system is set higher than that of the dryer. This would mean that the comfort ventilation system becomes permanently moist and our dryer would be permanently dehumidified (especially with our moisture control program). This seems highly unlikely, since a laundry room generally calls for a dry climate and the recommended target room humidities of the comfort ventilation system are somewhat lower than ours (see below).

Mould is caused by excess humidity in the room. Whenever laundry is hung up, the room air laundry drying function should be started to remove the humidity from the room. Alternatively, the moisture control programme can also be selected.

Apart from the usual cleaning processes, no further maintenance is required.

Blocked fluff filters and filter pads weaken the airflow. This means the laundry takes more time and energy to dry. This is why the fluff filters and filter pads should be cleaned regularly as stated in the operating manual.

Ideally so that the dry air flow of the DualDry flows directly on the laundry. However, the laundry also dries if the positioning is less ideal. The customer is free to install the hangar as they like. In an apartment building, the washing line is usually at a height of 180 - 190 cm. The washing line should not be lower than the air release flap.

You can find detailed planning information in our planning guide. For more advanced range hood topics and advice about what to consider during the planning stage, please refer to our TechInfo.

Cooktops and range hoods that feature the OptiLink function communicate with each other via Bluetooth. The fan level automatically adjusts to the current cooking level and switches off automatically when the cooktop is switched off – so you can focus all your attention on cooking without having to think about operating the range hood. All models in the V6000 and V4000 series have this technology integrated as standard at no extra cost.

Up to three cooktops at the same time.

Yes you can – various range hoods have the FlexLED function. This allows you to easily adjust the colour temperature, from a warm-white 2700 kelvins to a cool 4000. This feature creates the perfect atmosphere in harmony with the kitchen lighting and can be individually tailored to all kinds of lighting concepts.

Range hoods need enough replacement air to guarantee optimum extraction performance. You can ensure this by opening a window or incorporating a replacement air unit. If there is insufficient replacement air, this can create negative pressure (a vacuum) – the range hood will become significantly louder and it will have difficulty conveying the cooking odours outside.

For safety reasons, we recommend that the cooking area is always well lit.

Three levels are available in OptiLink mode that vary in terms of their reaction times and the maximum possible power level. Level 1: Silent mode – reaction time 60 seconds and maximum power level 2 Level 2: Standard mode – reaction time 45 seconds and maximum power level 3 Level 3: Intensive mode – reaction time 20 seconds and maximum power level Intensive You can easily select whichever operating mode you want. When the appliance is switched off, press the "Light" and "Automatic run-on" buttons at the same time. The operating mode that is currently selected will be shown on the power level display. You can change the operating mode by pressing the power button. The selected setting will be saved 5 seconds after the last input.

Some range hoods are equipped with a warning light that shows you when the metal grease filter needs to be cleaned. The operating hours counter can be used to roughly estimate whether the metal grease filter is full or not.

The appliance automatically detects when descaling is necessary. If the refresh or hygiene programs are used every 2 days, the following descaling intervals will be necessary: Descaling interval depending on water hardness: ▪ Hard: approx. every 3 months ▪ Medium: approx. every 4 months ▪ Soft: approx. every 7 months

If you are not going to use the appliance for an extended period of time, empty the water tank and open the appliance door.

Applying steam makes the textile fibres smooth, causing creases to unfold. Clothing is smoothed out using a combination of its own weight and a gentle stream of air.

The additional hygiene program eliminates germs using an elevated temperature (above 60°C) over a relatively long exposure time. Independent laboratory trials have confirmed a reduction in germs of up to 99.99%.

Yes, in principle, body odour can also be removed from fabrics. It should be kept in mind, however, that body odour is produced to help remove bacteria. Since sweat is unique to each individual, the treatment result may differ from person to person. We recommend washing sweaty clothes.

Yes, wet clothes can easily be dried again in next to no time using the additional drying program.

Virtually all of them – but we advise against using the RefreshButler on water-sensitive fabrics such as fur or leather.

The integrated heat pump and the ventilation system blow warm air into the interior and whisk away the humid air.

There are two options. In the event of minor soiling, the unique, automatic cleaning program can be started via the OptiDos settings. It rinses both OptiDos dispensers with water. The second option can be applied when switching from softener to detergent or in the event of strong soiling (e.g. built-up deposits of detergent). This involves easily removing the OptiDos drawer manually without using tools and cleaning it by rinsing under the tap. Do not clean the drawer in the dishwasher.

V-ZUG offers the appliance hygiene function in AdoraWash Vx000 washing machines. It appears at regular intervals on the appliance. The program cleans the drum interior (while it is empty) at the maximum temperature, eliminating any bacteria that might lead to unpleasant odours.

Yes, the softener can be added separately in the right compartment even if detergent was chosen from the OptiDos drawer. This does not require any additional settings, as the detergent compartment on the right-hand side is rinsed for every wash.

We recommend checking the dosage setting of the selected OptiDos dispenser and, if necessary, adjusting it in accordance with the currently used agent. Here, we recommend the quantity stated by the manufacturer for 4–5 kg of laundry.

Yes. In the user settings, modular detergents can be activated by activating the function. This type of detergent is added to the detergent dispenser drawer on the right.

Yes, you can put the tumble dryer either next to or on top of the washing machine. The stacking kits supplied (AdoraWash/AdoraDry) make it safe and easy to install the machines.

Yes, you can – if you have a solar installation at home, you can use the hot water it generates for the washing machine.  This is an optional feature on AdoraWash Vx000 washing machines.

Detailed information is available online: https://home.vzug.com/en/

When you buy one of our quality appliances, we give you a complimentary demonstration at your home to ensure you make the most of all that our machines have to offer. Our website at www.zugplus.ch is regularly updated with seasonal recipe suggestions for our steamers and for the Microbraun SL. And if you have any cooking-related questions, our cookery hotline is there to help.

The trend is currently for liquid detergents and is moving away from powder. Tabs are hardly a thing yet when it comes to laundry. Percentages: 68% liquid, 26% powder and 6% caps/tabs (source: Mibelle Group, October 2018)

V-ZUG OptiDos supports the detergent selection with an intuitive, unique selection aid. It uses a symbol to show which detergent from the OptiDos dispenser suits the selected program best.

By pulling out the OptiDos drawer, the detergents added to both dispensers are automatically shown on the touch display.

Yes. Powder detergent, tabs, laundry bleach or comparable bleaches must not be filled in the containers.

The following liquid detergents can be added to each dispenser: Universal detergent, colour detergent, fine detergent, softener, wool detergent, baby detergent, detergent for black clothes, detergent for white clothes, outdoor detergent. The dispensers can be flexibly filled according to personal requirements. Both dispensers with detergent, both dispensers with softener, one dispenser of detergent and one dispenser of softener, only one dispenser used with detergent or softener. The dispensers are also easily emptied if necessary and filled with another agent.

Yes. Hand wash, WetClean and wool programs are available, and it’s also possible to activate additional functions such as Easy care.

The energy label provides information about this. Three factors are measured in washing machines – energy consumption, washing performance and spin efficiency. All V-ZUG washing machines have achieved an A+++ rating in energy efficiency.

Around 30% of the Swiss population have sensitive skin, which means that they need their laundry to be washed even more thoroughly than usual. The skin protection program in AdoraWash appliances is there to help with this by using a specially optimised rinsing procedure and ensuring that water penetrates the laundry extremely effectively. The V-ZUG Special Care Drum also whisks away any remaining traces of detergent. These features help to make skin irritation and itching from leftover detergent a thing of the past.

An extra-high model offers space for plates with a diameter of 33 cm. This means that an extra-high dishwasher makes sense if you want to use it for large plates, tall wine glasses or baking trays.

The water hardness controller ensures that the water always has the ideal hardness. This makes the detergent more effective and ensures that the dishes and glasses are treated gently.

The hygiene program is designed for particularly sensitive items such as cutting boards and baby bottles.

Because the cutlery drawer is located at the top of the dishwasher, loading cutlery is ergonomic and puts less strain on your back. The cutlery drawer is designed so that the pieces of cutlery do not come into contact with each other, enabling optimal cleaning and protecting your expensive cutlery. Espresso cups can be placed in the central part of the cutlery drawer. Thanks to the cutlery drawer, the cutlery basket in the lower basket is no longer required, leaving more space for plates and other items.

The Sprint program lasts 20 minutes and is suitable for quickly cleaning lightly soiled pre-dinner glasses. The Party program lasts 11 minutes and is perfect for when an exceptionally large number of dishes need to be washed quickly ready to be used again – for example, for a party with many guests. When using the party program, the dishwasher starts with a 20-minute heating phase, after which the dishwasher can be fully loaded up to five times in a row.

- You need to increase the amount of rinse aid in the user settings (factory-set to level 4). This will increase the level of rinse agent used in the rinsing process, thereby improving the dryness. - Select the DryPlus user setting on the dishwasher. DryPlus increases the temperature during final rinsing and extends the program duration.

Extremely fast programs are offered at each convenience level. These programs last between 11 and 30 minutes depending on the convenience level.

The dishwasher uses sophisticated technology to measure the amount of water which is drained from the dishwasher before flowing back into the water cycle via the drum floor. If little water flows back, the dishwasher recognises that it has a full load. The opposite happens when the dishwasher only has a light load. In this case, a large amount of water flows back into the system and the amount of water is adjusted automatically. This enables the dishwasher to save up to 1.5 litres of water for each main program selected.

Theoretically yes. Please discuss this option with your specialist dealer.

All-in-one tabs consist of pressed amounts of powder/rinse agent and salt. Because the substances are pressed, they cannot dissolve quickly enough to achieve their full cleaning effect when used in fast programs. The amounts of rinse aid and salt are also not enough to achieve the best possible cleaning result. This is why it is essential to add additional salt and rinse aid to the dishwasher! V-ZUG’s dishwashers are equipped with the All in 1 function, which can be used with tabs of any kind. You can activate this function for any V-ZUG dishwasher via the user settings. With this function, the dishwasher automatically extends the program duration by a maximum of 10 minutes for very short programs, and extends the final drying time by a maximum of 15 minutes. This enables the tabs to dissolve and achieve their full cleaning effect. The All in 1 function also automatically adjusts the use of salt and rinse aid, reducing it by 50%, and guarantees excellent cleaning and drying results every time.

The delayed start function makes it easy to take advantage of low night electricity rates. What’s more, the appliance remembers the time it was set to on the previous occasion, and with a mere 42dB(A), our dishwashers know how to keep their noise down. You won’t hear a thing.

The “Upper rack only”’ function makes a ZUG dishwasher even more flexible and will save 2.6 litres of water, depending on the wash program.

A dishwasher is such a valuable domestic helper that you can hardly imagine life without it. In recent years, dishwasher's water and energy consumption has been significantly reduced. This means that having an appliance clean the dishes is no longer just a time saver. Today, it is also much more economical and better for the environment than doing the dishes by hand. To clean the amount of dishes a ZUG Adora tackles in a single wash cycle, you would consume up to 40 litres of water, while the Adora manages with just 12.

Yes, absolutely. For optimum cleaning and drying results, we always recommend adding rinse aid to the dishwasher. The amount of rinse aid in the tabs is not sufficient to achieve optimum drying results.

Please first check the operating instructions to see if the solution is given there. If not, please call our free service number on 0800 850 850.

We recommend the following: Not all dishes are suitable for cleaning in a dishwasher. - Hand-wash items made of wood or plastic that are sensitive to alkalis or heat. - Earthenware tends to crack and splinter. - Glass and porcelain prints are only resistant to a limited extent and may dissolve over time. - Glass can become cloudy depending on the type and the detergent used. Check with your glass supplier whether the glass is dishwasher-safe. - Tension may develop in polished and thick-walled crystal glasses and bowls, which may lead to breakages. - Do not wash dishes with stickers. Dissolved stickers can block the filter system. - Objects made of silver, copper and tin tend to stain brown or black. - Aluminium tends to form stains. Wash aluminium separately or by hand.

Induction is the technology of the future: it is faster and more energy-efficient. One litre of water is brought to the boil in approximately two minutes. This is made possible by smart technology. Induction generates heat exactly where it is needed in the base of the pot. The glass around the heated cooking zone stays virtually cold, so no energy is wasted. An induction stove uses up to 40% less energy compared to other heating methods.

The PowerPlus function offered by almost all induction cooktops helps you save time. If, for example, you need to heat up a large quantity of water, you can have a cooking zone work at an increased power level of up to 140%. PowerPlus puts up to 3700 watts at your disposal.

Professional caterers have been raving about it, and you can have it in your own kitchen: a Teppan Yaki. Why is this Japanese method of cooking on a flat grilling surface so popular? Because you don’t need any pots and pans, it’s entertaining for your guests to watch, and you don’t have to worry about choosing the right cooking temperature and time. The cooking temperature, for example, can be set precisely according to the kind of food you’re preparing, and it stay at a constant level, no matter how many delicacies you pile onto the griddle. This ensures heat sensitive food is cooked particularly gently so that its taste, quality and nutrients are perfectly preserved. A Teppan Yaki will turn your dinner parties into an unforgettable experience.

Instead of the traditional heating element, an induction coil is placed beneath the glass ceramic cooktop, generating a varying electromagnetic field. The field generates eddy currents in the base of the pan, which leads to a rapid heating of the magnetic pan material.

As steamers are becoming increasingly popular, we have found that people tend to use fewer pots and pans in their cooking. This is why we have introduced cooktops featuring only three cooking zones that are more generously spaced.

For induction to work, the base of the pan must be ferromagnetic. As induction cooktops are quite popular, there is a broad range of well-priced pans available.

Yes, all V-ZUG induction and autarkic radiant cooktops are fitted with an automatic safety shut-off that prevents overheating.

Make sure the cooking zones are generously spaced so the pans don’t touch. We would recommend a cooktop with cooking zones in a V- or A-shaped alignment. You might also consider a panorama cooktop, where the cooking zones are positioned in a single line for easy access.

Induction cooktops are impressively fast. They react quickly and are finely adjustable, which means liquids will rarely boil over, if ever. As the heat is generated in the base of the pan only, the glass around the cooking zone is hardly warmed up at all. Therefore spilt food won’t burn and the cooktop can be cleaned easily with a damp cloth.

No, for security reasons, your smartphone or tablet must be on the same home network as your V-ZUG appliance. But you will still get notifications even when your device is not connected to the home network.

To connect your appliance wirelessly using wi-fi, follow these steps:

• Activate V-ZUG-Home in the user settings of your household appliance

• Download the V-ZUG app on your smartphone or tablet

• Use the app to connect the appliance to your home network.

For detailed instructions on connecting your appliance to the V-ZUG app, go to: Connect and enhance your experience with the V-ZUG app

Activating V-ZUG-Home mode is required to connect to the V-ZUG app.

Depending on the appliance, V-ZUG-Home mode may be found in the settings, or you can consult the V-ZUG-Home manual for appliance-specific instructions.

To benefit from the advantages of V-ZUG-Home, please download and install the V-ZUG app from Google Play or the App Store on your smartphone or tablet.

Yes, V-ZUG-Home appliances can be integrated into smart home systems. Integration into the DigitalSTROM smart home system is currently possible. For more information, please visit www.digitalstrom.com.

Select the following items on the menu of your household appliance:

1. Settings

2. Configure V-ZUG Home

3. Display information

4. IP address

The V-ZUG-Home appliance range is always expanding. You can find the current category overview on the following page: Connect and enhance your experience with the V-ZUG app

To configure the user settings, select the desired appliance in the app, then click on Settings. A new window will open, displaying the user settings.

Yes, you will get notifications wherever you have a wireless network (wi-fi) or mobile internet connection.

No, after successful setup you can use both frequencies. The appliance will remain connected to the 2.4 GHz wi-fi. However, make sure that the 2.4 GHz and 5 GHz wi-fi are in the same local network, otherwise only remote access is possible. This is the case if both wi-fi networks are running on the same router.

2.4 GHz wi-fi penetrates walls and floors better than 5 GHz wi-fi. V-ZUG therefore uses 2.4 GHz wi-fi to ensure an optimum connection to your appliances.

There may be various reasons for this:

• For security reasons, certain features may only be used on the appliance.

• The feature has not yet been implemented and will be added in a future version.

• For other technical reasons where it is more user friendly to keep the feature on the appliance.

Many appliances built from 2015 onwards can be connected to the V-ZUG app. You can also enter your serial number and add your appliance offline in order to register your warranty or view the manual.

V-ZUG-Home mode is deactivated.

Remote access has been extensively tested and works for all devices that are equipped with it. If problems occur, check if software updates for the appliance are available. Local conditions, such as the location of the appliance, can also make the connection more difficult.

The language settings depend on the settings on your smartphone or tablet. The region selected during onboarding does not influence the language.

To change the language in the app, please set the desired language in your mobile phone or tablet settings.

Favourites are not currently synchronised between the app and the appliance. We are working on new functionalities that will enable this in the future.

This means that

• favourites on the appliance are not visible in the app.

• favourites from the app are not visible on the appliance.

A steamer allows for gentle steam cooking that does not wash out valuable vitamins, minerals and flavours from your food. The unpressurised steaming process operates at temperatures between 30°C and 100°C to enable simple, precision cooking. A smart climate sensor allows the food to be steamed in the best possible conditions, regardless of the amount. The colours are preserved perfectly. Ideal for a healthy and balanced diet.

The appliance door can always be opened by hand or by using a wooden spoon. The best way to do this is to hold the corners of the glass front and open the door by hand.

Whether it’s your own creation, something spontaneous or a recipe from a book, everything is fully automated! With the V-ZUG BakeOmatic, there is no need to enter the cooking duration, temperature, operating mode or weight manually. Whether it’s a carefully thought out menu for guests or something you’ve thrown together using ingredients from the garden, refrigerator or pantry, the BakeOmatic always delivers quick, simple and tasty results. Thanks to unique sensor technology in the climate control system (CCS) with active ventilation flap, your cooking chamber will reach the ideal conditions for your dish. Your steamer or oven will automatically detect the weight and size of the dish and will select the best sequence of the various operating modes with exactly the right temperature and duration. What’s more, you can find out exactly when the dish will be ready just moments after you begin.

A freely selectable temperature range between 30°C and 100°C allows for complete freedom while cooking. After all, a delicious caramel flan will only be the perfect consistency if it is steamed at exactly 90°C. Fish is best poached at 80°C and, if you want to make your own yoghurt, 40°C is the temperature you need. Precise temperature settings are also essential for the Vacuisine function, which allows for slow cooking at low temperatures (lower than 100°C) in vacuum-sealed pouches. Professional chefs call this method of cooking “sous vide”.

The cooking chamber is heated by steam and hot air. The food is reheated gently without drying it out. This feature is suitable for reheating cooked food or for cooking convenience products and ready meals. Regeneration can be carried out simultaneously on several levels with no flavour transfer.

V-ZUG steamers make ideal additional appliances. This means you can always enjoy the benefits of having a steamer: You can prepare a delicious gratin or a piece of meat with automatic soft roasting in the oven, while the steamer handles ingredients such as rice, vegetables or an exquisite dessert. Stress-free cooking guaranteed.

The programme start can be individually defined via the delayed start. Furthermore, the controls can be automated via the moisture control programme.

During room air laundry drying, the room air (and therefore the clothes) is dehumidified; to this end, a heat pump is used. The temperature of the air blown out is only slightly above the temperature of the room air. DualDry releases a heat capacity of some 350-400 W into the room during operation. This means that the air blown out in normal operation is 5 - 10°C higher than the room temperature, but it is not electronically heated, which results in very good energy efficiency values. If the DualDry blows out tangibly hot air, this is often caused by a clogged fluff filter. Only when drying in the drum is the laundry dried with heated air.

Although the DualDry has time-controlled programmes, they do not need to be used to switch off the appliance automatically. An integrated humidity sensor measures the level of dryness reached and automatically deactivates the DualDry if the desired degree has been reached.

The appliance reports a fault. A9: Cleaning sieves and mats.

Very careful drying as drying is without heat and friction, walls kept dry and therefore no formation of mould, quick drying, no hanging in stuffy cellar rooms for days on end, possible to dry anything that can be stored in the room (e.g. tents, carpets, sleeping bags, covers).

With a heat pump tumble dryer, the drying takes place in a closed drum. The laundry is added to the drum and dried with the temperature of 55°C released by the integrated cooling circuit. With DualDry, the laundry is hung up on a washing line in the room. The DualDry blows dry air into the laundry items. They release the humidity into the room air. The humid room air is channelled via the evaporator installed in the DualDry. In doing so, the vapour in the air condensates on the cold evaporator surface. The dried and cooled air is then warmed up via the condenser and blown into the hanging laundry. DualDry uses the same heat pump to dehumidify the room air. However, the drying takes place at far lower temperatures.