Cleaning your cooktop surface | V-ZUG Danmark
Find osFind os

Cleaning your cooktop surface

Regular care keeps your cooktop pristine and performing at its best. A few simple routines after each use prevent residue and help preserve the surface for years to come.

How to clean the glossy and matte surfaces

Clean the cooktop after every use to prevent food residue from baking onto the surface. For everyday marks, wipe with a soft cloth dampened with warm water and a small amount of washing-up liquid. Finish by drying with a clean cloth to avoid streaks.

For tough residue, use a glass-ceramic scraper or special glass ceramic cleaning sponge, ideally while the hob is still warm. Once the surface has cooled, apply the recommended cleaner, wipe with a damp cloth or kitchen paper, then wipe and dry. For matte surfaces, clean the whole cooktop evenly for a uniform finish. See the operating instructions for your model, as the recommended cleaner may vary.

How to clean the CombiCookTop extractor

Switch off the appliance to ensure that no functions are active. Lift out the filter cassette and clean all surfaces with a soft cloth or brush, warm water and washing-up liquid. For recirculation models, remove the activated carbon filter before cleaning the interior. Dry thoroughly before reinserting. If liquid has run into the filter cassette, clean and dry immediately.

Clean the grease filter when the saturation indicator lights up. Lift out the cassette by its handle. Wash it in the dishwasher with the handle facing down (approx. 65 °C, intensive programme), or by hand in warm water (60 °C) with washing-up liquid. Dry thoroughly, reinsert and reset the indicator.

This single-use filter cannot be cleaned and should be replaced every three to six months or when the saturation indicator lights up. Replacement intervals depend on the model and usage, as specified in the operating instructions. Used filters can be disposed of with household waste.

This filter can be regenerated. Switch off the extractor to ensure no functions are active, then regenerate it in the oven at 200 °C for 60 minutes and let it cool to room temperature. A Longlife filter lasts up to three years and may be regenerated up to eight times before it needs to be replaced.

How to clean the CombiCookTop extractor

Switch off the appliance to ensure that no functions are active. Lift out the filter cassette and clean all surfaces with a soft cloth or brush, warm water and washing-up liquid. For recirculation models, remove the activated carbon filter before cleaning the interior. Dry thoroughly before reinserting. If liquid has run into the filter cassette, clean and dry immediately.

Clean the grease filter when the saturation indicator lights up. Lift out the cassette by its handle. Wash it in the dishwasher with the handle facing down (approx. 65 °C, intensive programme), or by hand in warm water (60 °C) with washing-up liquid. Dry thoroughly, reinsert and reset the indicator.

This single-use filter cannot be cleaned and should be replaced every three to six months or when the saturation indicator lights up. Replacement intervals depend on the model and usage, as specified in the operating instructions. Used filters can be disposed of with household waste.

This filter can be regenerated. Switch off the extractor to ensure no functions are active, then regenerate it in the oven at 200 °C for 60 minutes and let it cool to room temperature. A Longlife filter lasts up to three years and may be regenerated up to eight times before it needs to be replaced.

Lift cookware into position

No glass-ceramic surface is entirely scratch-proof. Always ensure pot bases are flat, dry and clean before placing them on the hob, so that residue does not bake onto the glass-ceramic surface during use. To avoid scratches, lift cookware into position rather than sliding it across the hob.

Wipe dry to prevent limescale

Thoroughly dry the glass-ceramic surface after every cleaning to prevent limescale and water marks, and wipe away water droplets immediately. Existing limescale marks can be removed by applying a mild vinegar cleaner or lemon juice, then wiping with a damp cloth.

Use WipeProtection for quick display cleaning

Activate the WipeProtection function when removing splashes, grease or fingerprints. It temporarily deactivates the touch controls to prevent unintended power level changes while quickly cleaning the display during cooking.

Pleje- og rengøringsvideoer

Vores knowhow-sektion indeholder forklarende videoer om rengøring af filtrene og vedligeholdelse af OptiGlass-glansen på din CombiCookTop V4000, så du får mest muligt ud af din V‑ZUG-oplevelse.

Rengøring af din gaskogeplade

Sluk apparatet, og lad det køle af. Tør overfladen af med en blød klud, varmt vand og et mildt rengøringsmiddel. Rengør brænderdelene, når de er kolde, og skyl dem derefter. Hold brænderåbningerne fri for snavs for en jævn flamme. Gryderiste kan komme i opvaskemaskinen, men sørg for, at silikonefødderne bliver siddende.

Tør overfladen af med en blød klud, varmt vand og et mildt rengøringsmiddel. Til rustfrit stål skal du bruge et specialrengøringsmiddel og tørre i stålets sliberetning. Rengør brænderdelene, når de er kolde, og skyl dem derefter. Gryderiste kan komme i opvaskemaskinen. Tør brænderne helt, og monter derefter ringen og dækslet igen, og sørg for, at de sidder centreret.

Rengøring af din gaskogeplade

Sluk apparatet, og lad det køle af. Tør overfladen af med en blød klud, varmt vand og et mildt rengøringsmiddel. Rengør brænderdelene, når de er kolde, og skyl dem derefter. Hold brænderåbningerne fri for snavs for en jævn flamme. Gryderiste kan komme i opvaskemaskinen, men sørg for, at silikonefødderne bliver siddende.

Tør overfladen af med en blød klud, varmt vand og et mildt rengøringsmiddel. Til rustfrit stål skal du bruge et specialrengøringsmiddel og tørre i stålets sliberetning. Rengør brænderdelene, når de er kolde, og skyl dem derefter. Gryderiste kan komme i opvaskemaskinen. Tør brænderne helt, og monter derefter ringen og dækslet igen, og sørg for, at de sidder centreret.

Wipe dry to prevent limescale

Thoroughly dry the glass-ceramic surface after every cleaning to prevent limescale and water marks, and wipe away water droplets immediately. Existing limescale marks can be removed by applying a mild vinegar cleaner or lemon juice, then wiping with a damp cloth.

Use WipeProtection for quick display cleaning

Activate the WipeProtection function when removing splashes, grease or fingerprints. It temporarily deactivates the touch controls to prevent unintended power level changes while quickly cleaning the display during cooking.