Search for specific questions and answers here or use filters to find the desired topic.
Filter
Why and how often does the RefreshButler need to be descaled?
The appliance automatically detects when descaling is necessary. If the refresh or hygiene programmes are used every 2 days, the following descaling intervals will be necessary: Descaling interval depending on water hardness: ▪ Hard: approx. every 3 months ▪ Medium: approx. every 4 months ▪ Soft: approx. every 7 months
Can the start time be programmed?
The programme start can be individually defined via the delayed start. Furthermore, the controls can be automated via the moisture control programme.
How loud is the room air function?
64 dB(A) in room air operation according to test regulation.
Does the DualDry blow out hot air?
During room air laundry drying, the room air (and therefore the clothes) is dehumidified; to this end, a heat pump is used. The temperature of the air blown out is only slightly above the temperature of the room air. DualDry releases a heat capacity of some 350-400 W into the room during operation. This means that the air blown out in normal operation is 5 - 10°C higher than the room temperature, but it is not electronically heated, which results in very good energy efficiency values. If the DualDry blows out tangibly hot air, this is often caused by a clogged fluff filter. Only when drying in the drum is the laundry dried with heated air.
Can the air flow be changed?
No, the air flow cannot be changed. However, as the air circulation has only a limited impact on the drying, factors such as the size of the room, volume of laundry or how the laundry was hung up are more decisive.
How effectively are creases removed?
The extent to which creases are removed very much depends on the type of fabric, as the fibre types all behave differently. Creases in textiles made from cotton and polyester fabric blends or wool, for instance, can be removed significantly more effectively than those in textiles made from linen, cotton or silk. A superior crease removal effect can also be achieved with cotton shirts labelled as "anti-crease" or "easy-care".
The drying period depends on the following factors:
spinning capacity of the selected washing programme, textile types, laundry volume in the room, room temperature and humidity, placement of the laundry in the room and how it is arranged, hanging habits (“double” over a line, “single” over a line with pegs, “single” over two lines)
How does the refresh programme work and how does it remove unpleasant odours?
The refresh programme draws out and then eliminates odours from textiles using a combination of an elevated temperature and steam.
How long does the drying take?
According to the measurement in line with the standard, the drying capacity at a maximum room size of 9 m² is 1.34 kg/h and it takes 5h 40min.
Is an artificial odour applied to the fabric during the refresh programme?
No – the photocatalysis process only removes odours and does not apply odorous or odour-masking substances to the fabric. A cupboard deodoriser can be used to match the scent to your liking.
Can rain-soaked clothes also be dried?
Yes, wet clothes can easily be dried again in next to no time using the additional drying programme.
How is the odour removal function in the RefreshButler different to other drying cabinet appliances?
The RefreshButler actually eliminates odorous substances, thereby removing odours with a lasting effect. Other appliances simply mask odorous substances with perfume or odour-masking scents during the refresh programme.
Can all textiles be refreshed in the RefreshButler?
Virtually all of them – but we advise against using the RefreshButler on water-sensitive fabrics such as fur or leather.
How does it eliminate germs and bacteria from clothing?
Recurring cycles of steam and special photocatalysis technology remove 99.99 % of germs and bacteria from clothing.
How does the RefreshButler dry the clothes?
The integrated heat pump and the ventilation system blow warm air into the interior and whisk away the humid air.
What is the energy consumption like compared to tumble drying or previous room air laundry dryers?
As drying in a room takes place at low temperatures and the laundry in a room can be less efficiently streamed with air, drying laundry in a room can require slightly more energy than when drying in the drum.
Which models are designed for use in a family home or flat?
The AdoraWash and AdorinaWash product ranges are ideal for family homes or flats, while the Unimatic range is designed for communal laundry rooms and small businesses.
How does the steam anti-crease programme work?
The steam anti-crease additional programme can be selected with a large number of washing programmes. The integrated heating function gently treats shirts, blouses, skirts and other items with steam generated at the end of the wash cycle. This makes ironing faster and more convenient – and sometimes even removes the need for it altogether.
How much laundry can be dried?
The nominal load is 1–7 kg for the drying process in the machine. If room air laundry drying is applied, a maximum room size of 25 m² is recommended. The room air laundry dryer has a drying capacity of 1.34 kg/h, which corresponds to about 5 hours for a full laundry load of 7 kg.
How does the appliance hygiene programme work?
Start it without putting any laundry in the washing machine. The programme heats a small amount of water to approximately 80°C and then treats the inside of the appliance with steam to significantly reduce the number of germs.
Can I use the tumble dryer for highly delicate items?
This is what you've been waiting for. The «ultra care» programme dries your delicate items at 55°C in just 90 minutes. A piece of advice: treat your laundry with even more care by giving it ample space in the washing drum.
When does it make sense to use washing powder?
Primarily for white laundry. Because only washing powder contains bleach and can therefore better remove stains from fruit, coffee, tea, etc.
What if too much foam forms during the wash?
We recommend checking the dosage setting of the selected OptiDos dispenser and, if necessary, adjusting it in accordance with the currently used agent. Here, we recommend the quantity stated by the manufacturer for 4–5 kg of laundry.
What exactly is the vibration absorbing system (VAS)?
With the new Adora model, VAS compensates an unbalanced load during the spinning phase. This means the machine runs particularly smoothly and quietly. Structure-borne sound and its transmission to adjacent rooms are greatly reduced, which makes the Adora ideal for use in apartments or in buildings with an air-proof envelope such as those built according to the MINERGIE® standard. As documented by official tests, the V-ZUG Adora with VAS conforms perfectly to the stringent requirements of SIA standard 181.
What is the purpose of the normal dry programme?
This programme is designed for homogenous loads - an entire machine full of terry towels or underwear, for example.
What is the purpose to the irondry programme?
Use this programme if you plan to iron your laundry immediately after washing it.
Can I put the tumble dryer on top of the washing machine if I don’t have much space?
Yes, you can put the tumble dryer either next to or on top of the washing machine. The stacking kits supplied (AdoraWash/AdoraDry) make it safe and easy to install the machines.
Can I dry woollens in the tumble dryer?
All woollens labelled as washable can be dried in the tumble dryer. The appliance uses a gentle drying process with adapted drum action and a low temperature (approximately 45°C).
Can I also connect the washing machine to a hot water supply?
Yes, you can – if you have a solar installation at home, you can use the hot water it generates for the washing machine. This is an optional feature on AdoraWash Vx000 washing machines.
How does the «Tip and go» function work?
You select a main programme by pressing a singlebutton. This means all the required settings are automatically chosen. If desired, you can select additional programmes or functions by pressing the corresponding buttons. If no button is pressed within 20 seconds, the programme selected will start automatically.
How do I link up my appliance?
Detailed information is available online: https://home.vzug.com/en/
Washing laundry at 20°C is becoming increasingly popular. Do V-ZUG washing machines offer this functionality?
To meet our customer's requirements, our new laundry room appliances now feature a 20°C wash programme that can be selected by pressing a dedicated button.
Why was the DualDry not also implemented in the V6000?
The DualDry was implemented in accordance with the OptiDos appliance for the V4000. This means that the two new V-ZUG products can be perfectly combined with one another.Furthermore, it is more cost-effective to offer the DualDry with the V4000 than would be possible with the V6000.
What is the life cycle of the drum lighting LED?
The lifecycle corresponds to the appliance lifecycle. Therefore 4,000 batches / 15 years.
Can the drum lighting LEDs be replaced?
Yes, the drum lighting can be replaced.
Is liquid detergent still the trend or will there be a switch to tabs?
The trend is currently for liquid detergents and is moving away from powder. Tabs are hardly a thing yet when it comes to laundry. Percentages: 68% liquid, 26% powder and 6% caps/tabs (source: Mibelle Group, October 2018)
Why does the V6000 model not exist with OptiDos?
Due to the heat pump, it is not possible to implement it in the AdoraWash V6000 due to a lack of space.
What different types of fridges are available?
There are refrigerators with or without an internal freezer compartment, pure freezers, refrigerator/freezer combinations, and wine coolers. Under-counter refrigerators are fitted underneath worktops in studio apartments or small flats. Conventional refrigerators are integrated into tall cupboards. These are available as fully integrated versions as well as in White or Nero. The real colossus of the refrigerator world comes in the form of the FoodCenter, whose features even include an ice maker for ice cubes, crushed ice or iced water in addition to a gigantic refrigerator compartment. We also offer luxury refrigerators and freezers in the Supreme line, whose sheer space and flexibility make them ideal for stocking up.Can water softener be dosed in the OptiDos washing machine? How would this work?
It cannot be dosed.
How do I prevent the formation of mould?
Mould is caused by excess humidity in the room. Whenever laundry is hung up, the room air laundry drying function should be started to remove the humidity from the room. Alternatively, the moisture control programme can also be selected.
What is the purpose of the NoFrost technology built into FoodCenter models?
NoFrost technology means you'll never have to manually defrost your fridge again. All of our FoodCenter models are fitted with NoFrost technology, which means they defrost automatically at regular intervals.How do I need to clean the DualDry?
The DualDry is cleaned like an Adora heat pump dryer. This means that the fluff filter should be regularly cleaned and the air inlet flap wiped with a damp cloth. The front insertion can be rinsed under running water.
Why is it so important to clean the dryer's fluff filters on a regular basis?
Blocked fluff filters and filter pads weaken the airflow. This means the laundry takes more time and energy to dry. This is why the fluff filters and filter pads should be cleaned regularly as stated in the operating manual.
How much rope do I need per wash?
40 m of rope per 10 kg of laundry are required.
What can be filled in the OptiDos dispensers?
The following liquid detergents may be added to each dispenser: Universal detergent, colour detergent, fine detergent, softener, wool detergent, baby detergent, detergent for black clothes, detergent for white clothes, outdoor detergent. The dispensers can be flexibly filled according to personal requirements. Both dispensers with detergent, both dispensers with softener, one dispenser of detergent and one dispenser of softener, only one dispenser used with detergent or softener. The dispensers are also easily emptied if necessary and filled with another agent.
What kind of power connection do I need?
A normal 230 volt socket (T13 / 10 A secured).
How must the DualDry be positioned?
The positioning is shown in the installation instructions.
Why are the fridges fitted with LED spotlights?
A new lighting concept using modern, high-grade LED spotlights integrated in the side panels ensures effective illumination even when the fridge is full.Should I use fabric conditioner if I want to dry my laundry in the tumble dryer?
Do not use fabric conditioner if drying the washing in a tumble dryer, unless the manufacturer states otherwise. Tumble drying automatically leaves the washing soft and fluffy to the touch. Using fabric conditioner can cause a thin, barely visible film to form on the drum and humidity sensors. This can lead to malfunctions and prevent the appliance from achieving the required degree of dryness.
I suffer from allergies. Can a washing machine help me cope with them?
The anti-mite programme eradicates mites and allergens – importantly, that includes house dust mite excretions, which are linked to respiratory problems. These unwelcome house guests are incredibly resilient, but they are completely wiped out by the anti-mite programme found in AdoraWash and Unimatic product lines. The results are so good that even technical institutes are sharing them.
What exactly is dynamic circulation cooling?
Dynamic circulation cooling ensures an even distribution and circulation of cool air in a large cooling space. This means more flexibility in placing food in the cooling space, as well as shorter cooling times.I don’t often have much time for washing. Are there any fast programmes available?
Yes, there are – the 40 °C and 60 °C Sprint programmes. Both of these are able to run with very little water and are gentle on your washing.
How important is it for the range hood to cover the entire hob surface?
The more the range hood covers the hob, the better the extraction performance. This is why flat pull-out deflector plates perform very well. For wall and island hoods, you should make sure that the majority of the hob is well covered.Does the room need to be closed?
An optimal drying process during room air laundry drying is guaranteed in rooms where the windows and doors are closed. This reduces the penetration of humid air from the outside.
Does the DualDry also work in unheated rooms?
An optimal drying result is reached at a room temperature of 10-30°C. In rooms with very low temperatures, the function may be restricted. The DualDry may not be used under 8°C.
What types of range hoods are there?
There are different solutions to suit you – whether you want your range hood to be an eye-catching design feature or for it to be discreetly integrated into your kitchen. On the wall If you want to make your range hood stand out, then a wall hood is a great choice. Wall hoods are also available as slanted versions which provide ample headroom. They are installed on the wall directly above the hob. Integrated into the kitchen units If you would rather incorporate the hood into the kitchen so that it is virtually invisible, then we recommend a built-in range hood with a glass canopy, a flat-panel range hood or an integrated range hood. These are perfect for kitchens in which you need to make clever use of the space. On the ceiling Range hoods designed for ceiling installation are the perfect solution in open-plan kitchens that feature a free-standing cooking island. Choose your favourites from our elegant ceiling range hoods and our wide range of attractive island hoods. Downdraft or in the hob itself Without long detours, cooking vapours are whisked away at the very place where they first develop – on the hob itself. Our integrated hob hood, the pull-out downdraft and the induction hob with integrated range hood offer increased headroom and extract the vapours downwards.How much heat does the DualDry release when drying laundry in a room?
DualDry releases a heat capacity of some 350-400 W into the room during operation.
Which range hoods are particularly quiet?
The level of noise emitted by a range hood depends on the model and extracted air system chosen. In the case of extracted air range hoods, the following rule applies: the smaller the diameter of the exhaust duct, the louder the appliance. As a result, we recommend using a pipe diameter of 150 mm in extracted air mode.Is it a good idea to install a sound absorber with a wall/island hood or built-in range hood?
Yes, we would definitely recommend installing a sound absorber to reduce the overall noise emissions. In extracted air mode, both the fan noise going outside and the outdoor noise coming inside via the extracted air duct can be reduced. In the case of recirculation mode, the sound absorber is positioned directly on the fan nozzle in the hood flue.What material is the ventilation duct of the DSMS hob hood made from?
The material is a flame-retardant plastic blend, which is self-extinguishing with a V0 classification as per the UL94 standard.What does the energy efficiency category say about a range hood?
The energy efficiency category helps you to understand a range hood’s energy consumption and to compare it to others. Since the start of 2020, products have been given a rating on a scale of A+++ to D. The most energy-efficient V-ZUG range hoods are in efficiency category A++.How do the hob hood and the hob with integrated range hood work?
Steam and odours rise at a maximum rate of one metre per second. The V-ZUG hob hood or hob with integrated range hood extracts the air using a cross current that is higher than the rising speed of the cooking vapour. As a result, cooking vapours and odours can be effectively extracted straight away at the hob.Does the hob ventilation/hob hood ventilation also work with taller pots?
Cooking vapours can be extracted without any problems in the case of pots up to 20 cm tall. For pots that are over 21 cm tall, we recommend placing the pot lid at an angle in order to direct the steam towards the range hood.What do I need to consider with regard to the exhaust duct?
If possible, you should make sure that the duct diameter is at least 125 mm and ideally 150 mm. If there is no room for a round pipe, a flat channel with an equivalent cross section may also be used. The use of 90° pipe bends should be kept to a minimum. Narrowing cross sections and reducing pipes with a smooth inner surface should also be avoided. We recommend using short piping lengths, wall boxes with large slats and sufficient replacement air.What do I need to know about range hoods using recirculation air?
Compared with the extracted air solution, there is much less to consider for range hoods with recirculation air, particularly if you have chimney-based heating (such as gas, oil or coal-fired heaters, flow heaters, water heaters and open fireplaces). They are easy to install and they can be operated without restrictions if the range hood is used in recirculation mode with an activated charcoal filter. To use recirculation mode, you must provide an activated charcoal filter – the filter absorbs unpleasant odours and ensures there is fresh air in the kitchen while you are cooking.Where can I find the planning information for range hoods?
You can find detailed planning information in our planning guide. For more advanced range hood topics and advice about what to consider during the planning stage, please refer to our TechInfo.What do I need to bear in mind in terms of Minergie construction?
In principle, all variants (exhaust air and/or recirculated air) are permissible for range hoods in Minergie residential buildings. Detailed information on this topic can be found at: https://www.minergie.ch.What is OptiLink?
Hobs and range hoods that feature the OptiLink function communicate with each other via Bluetooth. The fan level automatically adjusts to the current cooking level and switches off automatically when the hob is switched off – so you can focus all your attention on cooking without having to think about operating the range hood. All models in the V6000 and V4000 series have this technology integrated as standard at no extra cost.Does every hob work with OptiLink?
To fully enjoy OptiLink, both the hob and the hood must be equipped with the OptiLink function. Look out for the "Fan wheel with chain links" symbol in the "Equipment and operating modes" section.How many hobs can I connect to a range hood via Bluetooth?
Up to three hobs at the same time.How do I connect my hob to the range hood so that I can use OptiLink?
Connecting, or pairing, your V-ZUG built-in range hood with our networkable hobs is a breeze.Can I adjust the colour temperature for the range hood lighting?
Yes you can – various range hoods have the FlexLED function. This allows you to easily adjust the colour temperature, from a warm-white 2700 to a cool 4000 kelvin. This feature creates the perfect atmosphere in harmony with the kitchen lighting and can be individually tailored to all kinds of lighting concepts.
What makes the extractor hoods particularly user-friendly?
We recommend conveying the extracted air outside wherever possible, as this carries smells away from the kitchen. The most effective solution is to use an exhaust system (duct) with a diameter of 150 mm.
Should I leave the windows and doors open or closed when using the range hood?
Range hoods need enough replacement air to guarantee optimum extraction performance. You can ensure this by opening a window or incorporating a replacement air unit. If there is insufficient replacement air, this can create negative pressure (a vacuum) – the range hood will become significantly louder and it will have difficulty conveying the cooking odours outside.
Do I need to air the room when I use my range hood?
You should always ensure there is a supply of replacement air when the range hood is running. In the case of a recirculation air range hood, this enables air that is still moist after passing through the filters to be replaced. In extracted air solutions, an open window helps to optimise the air flow and prevents negative pressure building up in the kitchen.
Can I switch off/suppress the automatic light activation if I don’t really need a light above the cooking area?
For safety reasons, we recommend that the cooking area is always well lit.
Does the screen need to be pulled out on a built-in range hood for OptiLink to work?
The screen must always be pulled out to ensure the range hood can work at its best.
Can I adjust the reaction times for the hob and range hood in OptiLink operating mode?
Three levels are available in OptiLink mode that vary in terms of their reaction times and the maximum possible power level. Level 1: Silent mode – reaction time 60 seconds and maximum power level 2 Level 2: Standard mode – reaction time 45 seconds and maximum power level 3 Level 3: Intensive mode – reaction time 20 seconds and maximum power level Intensive You can easily select whichever operating mode you want. When the appliance is switched off, press the "Light" and "Automatic run-on" buttons at the same time. The operating mode that is currently selected will be shown on the power level display. You can change the operating mode by pressing the power button. The selected setting will be saved 5 seconds after the last input.
Can you clean the metal grease filters in the dishwasher?
All metal grease filters should be cleaned at least once every two months (more frequently in the event of intensive use, and at the latest when the noise increases). Range hoods with saturation indicators on the display remind you to clean them regularly. You can soak the metal grease filter by hand and clean it with gentle detergent. It can, of course, also be cleaned in the dishwasher – simply choose an intensive programme. If you choose to wash the filter in the dishwasher, do not place any other crockery in the dishwasher.What is the metal grease filter saturation indicator?
Some range hoods are equipped with a warning light that shows you when the metal grease filter needs to be cleaned. The operating hours counter can be used to roughly estimate whether the metal grease filter is full or not.How often does the activated charcoal filter need to be replaced?
The activated charcoal filters can be easily removed and regenerated, depending on the model. The most efficient long-life plus activated charcoal filter, for example, can be regenerated in the oven every three to six months. The long-life activated charcoal filter can be cleaned in the dishwasher and then dried in the oven. Conventional activated charcoal filters need to be replaced every six months or so.Is it still necessary to soak encrusted gratin dishes and fondue pans in water over night?
The fondue/raclette programme provides a remedy for this. Caquelons and raclette pans become perfectly clean without soaking. The programme is also suitable as a "super intensive programme" thanks to the active softening phase. Pre-rinsing burnt gratin dishes is a thing of the past thanks to this world first from V-ZUG.
My dishwasher has an unpleasant odour – what can I do?
To remove unpleasant odours, you can take the following steps. Remove the filter and clean it thoroughly. Select a more powerful programme, such as the Intensive programme. Refill the regenerating salt. Run the Pre-rinsing programme from time to time. Buy a commercially available dishwasher cleaner and add this using the Intensive programme.
What kind of regeneration salt do I need to use for the dishwasher?
You can use either fine or coarse-grained regular regeneration salt.
Is there a programme that automatically detects the degree of soiling?
Yes, our ingenious automatic wash programme continuously measures how dirty the dishes are and adapts the washing process accordingly. This ensures the appliance only uses the amount of time and resources required to get the dishes perfectly clean.
How has the use of water in our dishwashers developed over time?
20 years ago, our dishwashers would still use 38 litres of water. Now, our SL line dishwashers start from as little as 5 litres of water in the Automatic programme.
How has the use of energy in our dishwashers developed over time?
In the standard programme, our heat pump device uses a record low of 0.55 kWh of energy. 20 years ago, this figure would have been four times as great, with dishwashers using 2 kWh of energy.
What is the capacity of a dishwasher?
Dishwasher capacity is given in the form of place settings, which constitute a standardised value. A place setting comprises a certain number of plates, glasses, cups, cutlery, bowls and other items. Our dishwashers are able to accommodate between 12 and 14 place settings depending on the model.
What is the difference between integrated and fully integrated dishwashers?
With integrated dishwashers, the operating panel is visible. This is particularly useful for ChromeClass/AluClass models, as they also function as design elements. In contrast, design-integrated models feature a mirrored operating panel that fits perfectly with the FutureLine design. A wood panel the colour of your kitchen is fixed below the operating panel. With fully integrated dishwashers, the operating panel is concealed. Only when you open the appliance, you'll find it integrated in the door's upper edge.
What are the different installation options for dishwashers?
Dishwashers with a customisable design have an operating panel in the same colour as the design elements. With integrated dishwashers, the operating panel is visible and the lower part of the appliance adopts the colour of your kitchen. Fully integrated dishwashers feature an entire front in your kitchen's colour.
How long does the shortest wash programme last?
If you're in a hurry, for example during a party, the Adora SL's sprint programme will clean your dishes in just 19 minutes. And when we say clean, we mean spick and span.
Would you recommend installing a dishwasher in an elevated position?
If there is sufficient space in a tall cabinet, an elevated position can be very useful as there is no need to bend down in order to load and empty the dishwasher. Just remember that the maximum length of the armoured hose is three metres.
Can an existing cooker or oven be replaced with a steamer?
The CombairSteamer fits best in an existing niche (762 mm) for a standard oven or cooker. These appliances combine a complete oven and steaming functions. CombairSteamers offer all the steaming programmes of a steam cooker and the classic functions of an oven – such as hot air, top/bottom heat and grill. If expanding the niche is possible, we recommend the classic combination of a 45 oven and a 45 CombiSteamer, allowing you to benefit from the flexibility of having two cooking chambers.
How do I achieve perfectly tender meat?
The patented automatic soft roasting mode guarantees automatic, dynamic control over the food probe temperature. The meat becomes tender, stays juicy and is perfectly cooked. Combined with the new three-point food probe, the meat is prepared to perfection at the push of a button – cooking it to exactly the right level so that it can be served when you want.
How much does the water tank hold and what is easiest way to clean it?
The water tank holds one litre of water, which is sufficient for different steaming periods and is dependent on the temperature and the nature of the food. With Vacuisine, it is possible to reach over 48 hours of cooking time without having to refill the water tank. The water tanks in the Excellence Line can be cleaned in a dishwasher.
How does the hot air humid operating mode on the steamer work?
A heating element behind the hot air diffuser plate heats up the air inside the cooking chamber, which is circulated evenly. Any moisture escaping from the food is kept to a minimum within the cooking chamber. The food retains its moisture. The feature is suitable for gratins, casseroles, bread and yeast pastries on two levels.
How does the hot air with steaming operating mode work?
A heating element behind the hot air diffuser plate heats up the air inside the cooking chamber, which is circulated evenly. Steam is then introduced into the cooking chamber. The use of steam can improve heat transfer to the food. Incidentally, steam over 100 °C is not visible. The programme is particularly suitable for gratins, casseroles, meat, frozen products, chestnuts, puff and yeast pastry, bread and convenience products on 1 or 2 levels.
Limescale deposits require a lot of cleaning – how do I deal with them?
The external steam generator ensures that the only thing that can get into the interior is steam. As steam doesn’t leave limescale residue, you don’t have to worry about this when using the V-ZUG steamer. Cleaning is made so much easier, as there’s no limescale to remove from the interior. What’s more, the water tank for the steamers in the Excellence Line has a perfectly smooth surface, which helps to prevent limescale deposits from forming.
At the end of the steaming process, does residual water not remain?
The external steam generator and the climate sensor ensure that only the required amount of steam can enter the cooking chamber. The steam that condenses on the food accumulates on the base of the cooking chamber as residual water. This residual water depends on the amount of food in the chamber, its temperature and the cooking time. During the cooking process, bottom heating evaporates the residual water. For a normal quantity of vegetables, the residual water on the bottom can usually be removed by wiping with a cloth. Where larger quantities of food, or frozen food, are concerned, the stainless steel tray under the perforated cooking tray helps to collect residual water.
How are the external steam generators descaled?
The external steam generator indicates when it should be descaled. This is dependent on water hardness and the level of use. An automated descaling programme will guide you through the simple process.
